Somes Access Points setting 80mhz will jump to channel 161 40mhz

My Area code is HK
When I set channel 116 80 mhz in cloud
It will jump to 161 40mhz after around 1 day,  cloud UI showing channel 116 80 mhz , but i use scanning tool in my mobile phone , it show ch161 40mhz
My other model Ap820L-V3  and AP840L do not hv this problem

May you show me the device radio setting screenshot on Cloud, and your scanning tool result?
May you share with me "show run" information on this AP820-L(V3) pls?
After scanning tool find it changes to ch161 40mhz, what will device cli shows the result?
Please share with us your country code setting screenshot, and Wi-Fi Optimization screenshot.

GTAC-Micca replied at 2023-9-16 14:51
May you show me the device radio setting screenshot on Cloud, and your scanning tool result?
May you ...

Some info update, all models of my AP also have this problem.
I did not use Wi-Fi Optimization. I use manuel config channel 36,52,100,116,149
  


Building configuration...
Current configuration: 6138 bytes

version AP_RGOS 11.9(6)W1B4, Release(09191916)
hostname AP48-M58
!
errdisable recovery interval 300
wqos fs enable
fair-schedule
rldp enable
sntp interval 7200
sntp server hk.pool.ntp.org
sntp enable
wids
attack-detection enable all
dynamic-blacklist lifetime 60
dynamic-blacklist enable
!
black-white-list
!
http redirect port 443
web-auth acct-update-interval 1
web-auth sta-preemption enable
!
aaa new-model
!
aaa accounting update
aaa accounting network macc2_dot1x_account_method_wlan_1 start-stop group macc2_radius_group_wlan_1
aaa accounting network macc2_dot1x_account_method_wlan_2 start-stop group macc2_radius_group_wlan_2
aaa accounting network macc2_dot1x_account_method_wlan_3 start-stop group macc2_radius_group_wlan_3
aaa authentication dot1x group_macc2_radius_group_wlan_1 group macc2_radius_group_wlan_1
aaa authentication dot1x group_macc2_radius_group_wlan_2 group macc2_radius_group_wlan_2
aaa authentication dot1x macc2_dot1x_auth_method_wlan_1 group macc2_radius_group_wlan_1
aaa authentication dot1x macc2_dot1x_auth_method_wlan_2 group macc2_radius_group_wlan_2
aaa authentication dot1x macc2_dot1x_auth_method_wlan_3 group macc2_radius_group_wlan_3
!
cwmp
acs url http:/cwmpb-as.ruijienetworks.com/service/acs/G1RUXXXXXXXX
cpe inform interval 180
timer cpe-timeout 90
!
ip name-server 1.1.1.1
ip name-server 8.8.8.8
!
enable service web-server http
enable service web-server https
webmaster level 0 username admin password 7 XXXXXXXXXXXXXXXXXXXXXX
!
macc wis enable
macc dot1x syslog enable
macc webauth syslog enable
macc syslog enable
macc syslog keyword WLAN|STAMG
log_mng set up HTTP
log_mng set uu http//34.87.93.12/macclog/log/upload
log_mng set upd 300
log_mng set log-server http//34.87.93.12
macc roam enable
no service password-encryption
!
aaa group server radius macc2_radius_group_wlan_1
server 10.11xxxxx
server 10.11xxxxx
!
aaa group server radius macc2_radius_group_wlan_2
server 10.11xxxx
server 10.xxxxx24
!
aaa group server radius macc2_radius_group_wlan_3
server 10.115xxxxxx
server 10.11xxxxx
!
radius-server host 10.115.XXXXX key XXXXXXX
radius-server host 10.115.XXXXX key XXXXXXXX
radius-server host 10.115.XXXXX key XXXXXXXX
radius-server host 10.115.XXXXXX key XXXXXXX
radius-server host 10.115.XXXX key XXXXXX
radius-server host 10.115.XXXXXXX key XXXXX
radius-server attribute 31 mac format ietf
logging server 10.115.97.61
clock timezone AsiaHongKong +8 0
!
dot11 wlan 1
ssid Teacher
ssid-code utf-8
!
dot11 wlan 2
ssid Student
ssid-code utf-8
!
dot11 wlan 3
ssid Andriod
ssid-code utf-8
!
dot11 wlan 4
ssid Devices
ssid-code utf-8
!
dot11 wlan 5
band-select enable
ssid Guest
ssid-code utf-8
!
link-check disable
!
nfpp
!
wlocation
!
login access non-aaa
enable service ssh-server
vlan 1
!
vlan 101
!
vlan 102
!
vlan 103
!
vlan 104
!
vlan 109
!
vlan 110
!
vlan 1000
!
interface GigabitEthernet 0/1
encapsulation dot1Q 1
rldp port loop-detect shutdown-port
!
interface GigabitEthernet 0/1.101
encapsulation dot1Q 101
ip dhcp snooping trust
!
interface GigabitEthernet 0/1.109
encapsulation dot1Q 109
ip dhcp snooping trust
!
interface GigabitEthernet 0/1.110
encapsulation dot1Q 110
ip dhcp snooping trust
!
interface GigabitEthernet 0/1.1000
encapsulation dot1Q 1000
ip dhcp snooping trust
!
interface MTGigabitEthernet 0/2
encapsulation dot1Q 1
rldp port loop-detect warning
ip dhcp snooping trust
!
interface MTGigabitEthernet 0/2.7
encapsulation dot1Q 102
!
interface Dot11radio 1/0
ofdma enable
country-code HK
radio-type 802.11b
mu-mimo enable
txbf enable
rate-set 11b mandatory 11
rate-set 11b disable 1 2 5
rate-set 11g mandatory 11
rate-set 11g support 6 9 12 18 24 36 48 54
rate-set 11g disable 1 2 5
rate-set 11n mcs-support 15
rate-set 11ac mcs-support 19
rate-set 11ax mcs-support 23
no ampdu-rts
sta-limit 64
11axsupport enable
11acsupport enable
power local 15
channel 6
chan-width 20
!
interface Dot11radio 1/0.5
encapsulation dot1Q 1000
wlan-id 5
!
interface Dot11radio 2/0
ofdma enable
country-code HK
no short-preamble
radio-type 802.11a
no mu-mimo enable
txbf enable
rate-set 11a mandatory 12 24
rate-set 11a support 18 36 48 54
rate-set 11a disable 6 9
rate-set 11n mcs-support 15
rate-set 11ac mcs-support 19
rate-set 11ax mcs-support 23
no ampdu-rts
sta-limit 128
11axsupport enable
11acsupport enable
assoc-rssi 35
response-rssi 20
power local 22
channel 52
chan-width 80
!
interface Dot11radio 2/0.1
encapsulation dot1Q 109
wlan-id 1
!
interface Dot11radio 2/0.2
encapsulation dot1Q 110
wlan-id 2
!
interface Dot11radio 2/0.3
encapsulation dot1Q 110
wlan-id 3
!
interface Dot11radio 2/0.4
encapsulation dot1Q 101
wlan-id 4
!
interface Dot11radio 2/0.5
encapsulation dot1Q 1000
wlan-id 5
!
interface BVI 1
ip address 10.XXXXXXX 255.255.255.0
!
wlansec 1
security rsn enable
security rsn ciphers aes enable
security rsn akm 802.1x enable
dot1x authentication macc2_dot1x_auth_method_wlan_1
dot1x accounting macc2_dot1x_account_method_wlan_1
!
wlansec 2
security rsn enable
security rsn ciphers aes enable
security rsn akm 802.1x enable
dot1x authentication macc2_dot1x_auth_method_wlan_2
dot1x accounting macc2_dot1x_account_method_wlan_2
!
wlansec 3
security rsn enable
security rsn ciphers aes enable
security rsn akm 802.1x enable
dot1x authentication macc2_dot1x_auth_method_wlan_3
dot1x accounting macc2_dot1x_account_method_wlan_3
!
wlansec 4
!
wlansec 5
security rsn enable
security rsn ciphers aes enable
security rsn akm psk enable
security rsn akm psk set-key ascii duntellstu
!
ip route 0.0.0.0 0.0.0.0 10.1XXXXXX.1
!
no offline-detect
!
snmp-server host 10.11XXXXXXX traps version 2c XXXXXX
snmp-server community XXXX ro
!
line console 0
login
password admin
line vty 0 4
privilege level 15
login
password XXXXXXXXXX
!
end

Ericko replied at 2023-10-10 09:33
GTAC-Micca replied at 2023-9-16 14:51
May you show me the device radio setting screenshot on Cloud,  ...

Sorry for your inconvenience, would you mind share with me your project so that we can login and check for you? For protect your network, please send the link to my email address: guominxiang@ruijie.com.cn

GTAC-Micca replied at 2023-10-10 15:08
Sorry for your inconvenience, would you mind share with me your project so that we can login and c ...

May I confirm with you please? when device web shows channel 52, bandwidth 80, then the APP shows channel 161, bandwidth 40, right? what is cloud shows at this time?

GTAC-Micca replied at 2023-10-10 15:35
May I confirm with you please? when device web shows channel 52, bandwidth 80, then the APP show ...

Web Cloud Config show: 52

APP Cloud Config show: 52
AP HTTPS admin page config show: 52
AP HTTPS admin page connected clients show: 161 (40mhz)
Wifimain app and ruijie moho show radio: 161 (40mhz)