1) Check whether the SSID can be searched, if it fails, check the primary router status and test if other devices can search the SSID of the primary router. 2) If the primary EW's SSID can be searched. Check whether the EW router can get an IP address via DHCP successfully. If it fails, please check the DHCP configuration on DHCP server and test if other devices connecting to the same SSID can get IP successfully.  3) Put the secondary router and the primary router closer and do wireless bridge once again. 4)Connect the LAN port of the primary router to the WAN port of the secondary router, and configure it to Access point, after it has bridged successfully, disconnect the network cable and switch as wireless repeater.  5) Restore factory setting and bridge once again  6) If the problem is still unsolvable, you may start a Live Chat with our Support Engineer for assistance: RITA Live Chat |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
