RG-ES208GC VLAN

Can someone teach me how to configure VLAN on RG-ES208GC?
Example: Vlan 20, Vlan 30, Vlan 40 and Vlan 2 as the master or super vlan? Each packets that comes from Vlan 20 to 40 will be filtered by Vlan 2.
Can anyone also give me an example how to do it (with screenshots) for me to have a reference?

Thanks!

Dear:
You can refer to following link to create VLANs please https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=1888. In the link you can find pictures about how to configure them.
Regarding your question about super VLAN, sorry sir, but ES switches does not support super VLAN
Regards

GTAC--Javier replied at 2023-8-9 06:47
Dear:
You can refer to following link to create VLANs please https://community.ruijienetworks.com/fo ...

Thank you for the reply sir. I have another question. If I plug ISP to Port 1 and my trunk port is Port 2, can I configure the switch to multi-vlan and every packets from others vlans will pass through my Port 2 (Trunk) before Port 1?

Christian replied at 2023-8-9 11:05
Thank you for the reply sir. I have another question. If I plug ISP to Port 1 and my trunk port is ...

Dear:
You can use as much VLANs as you want, but at the end, your gateway which is the IP address of your ISP is the one who defines the network segment. So, in this scenario, wouldn't help the VLANs sir, because all devices must be in the same network segment. To do the tasks you want, I mean, with multiple VLANs, you need a gateway device.
Regards.