Reyee or Ruijie AP redundancy mode?
|
Is it possible to connect both Reyee or Ruijie APs to two separate switches using an RJ45 cable? And if one switch fails, will the AP switch to the other? Of course, in this case, the AP is powered externally from the power supply not using PoE. |
|
Dear Grzegorz Jabłoński, Really sorry for the late reply. You can connect 2 APs to different swicthes. But you cannot realize the scenario. |
GTAC-Vivian replied at 2024-1-23 18:49 Connecting Reyee or Ruijie APs to two separate switches using RJ45 cables is possible, commonly known as dual-homing. However, for automatic failover, you'd typically need a network protocol like Spanning Tree Protocol (STP) or a switch with link aggregation capabilities. This ensures that if one switch fails, the other takes over seamlessly. Also, external power doesn't affect this process. Double-check AP and switch compatibility for the best results. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
