Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

How to enable the WiFi 6 function of Ruijie AP by command Reply

GTAC-Bancroft

Level 1

How to enable the WiFi 6 function of Ruijie AP by command
1551 0 2023-8-3 16:25:15
Original
You can turn on WiFi6 with the following command
Fit mode :
Ruijie(config)# ap-config  -------Configure all APs under AC
Ruijie (config-ap) #11axsupport enable radio 1 ----> Enable radio 1  802.11ax functionunder 2.4G
Ruijie (config-ap) #11axsupport enable radio 2 ----> Enable radio 2  802.11ax functionunder 5G
Fat/Macc mode:
Ruijie (configuration) #int dot11Radio 1/0
Ruijie(config-if-Dot11radio 1/0)#11Axsupport Enable---- > Enable Radio 1 802.11ax function under 2.4G
Ruijie (config-if-Dot11Radio 1/0) #exit
Ruijie (configuration) #int dot11Radio 2/0
Ruijie (config-if-Dot11Radio 2/0) #11axsupportEnable ---- > Enable Radio 2 802.11ax function under 5G
Ruijie (config-if-Dot11Radio 2/0) #end
Ruijie #wr
RG-S5300-24GT4XS-P-E

Configuration Switch
There are no replies.
Related Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd