What can I do if NFPP logs are displayed all the time on Ruijie AP?

Fault phenomenon



Problem description：
It takes some minutes for a newly connected user to connect to AP. After checking logs and find there are a lot of dos attacks logon AP. The more users connected to AP, the more logs there are.
Requirements:
After functions such as arp-guard and ip-guard are enabled in NFPP, log information is printed according to the corresponding configuration. If certain attacks are received, users may be unable to access the Internet. Therefore, you can disable the nfpp protection mechanism.
Configuration command:
Ruijie#conf
Ruijie(config)#nfpp
Ruijie(config-nfpp)#no arp-guard enable ------>Disable the ARP-guard function
Ruijie(config-nfpp)#no dhcp-guard enable ------>Disable the dhcp-guard function
Ruijie(config-nfpp)#no dhcpv6-guard enable------> Disable the dhcpv6-guard function
Ruijie(config-nfpp)#no icmp-guard enable ------>Disable the icmp-guard function
Ruijie(config-nfpp)#no ip-guard enable ------>Disable the ip-guard function
Ruijie(config-nfpp)#no nd-guard enable ------>Disable the nd-guard function
Ruijie(config-nfpp)#end ------> Exit
Ruijie#wr ------> Save the configuration
Ruijie#clear nfpp arp-guard scan
Ruijie#clear nfpp log

If you are many APs in your networks, you can configure batch delivery according to this guide: https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=1760


Verification:
After disable it and clear nfpp logs, there are no more NFPP logs on device and user can access internet as normal.