How to capture a packet on Reyee NBS Switch?

1.Topology：

2.Scenario：
When there is a need for packet capture and ReyeeNBS switch is only one device that supports this feature.
3.Configuration：
3.1 Login to the eweb of Reyee NBS switch, enter this path:
[More]> [Ports] > [Port Mirroring]

3.2 Click on Edit button, add a new rule for port mirroring.

3.3 Select a port that you want to collect trafficfrom it as the Src Port (SourcePort).
Remember to turn off the Receive Pkt from Non-Src Ports button if you don't want to collect the traffic from other ports.

3.4 Select a port that is available to be connected with your PC as the Dest Port. Click OK.

4.Result:
Connect one PC to the Dest Port you just set earlier, run Wireshark software on the PC, and you will be able to capture a packet from Reyee NBS switch.