|
You can adjust the beacon cycle of Ruijie AP withthe following command Fit AP(Enter the following command on AC): AC#configure terminal AC(config)#ap-config AP1 AC(config-ap)#beacon period 300 radio 1 ----->Configure the Beacon frame periodof radio 1 to 300ms, the default is 100ms AC(config-ap)#end AC#wirte Fat/MACC AP: Ruijie#configure terminal Ruijie(config)#interface dot11radio 1/0 Ruijie(config-if-Dot11radio 1/0)#beacon period300 ----->Configure the Beacon frame period of radio 1 to 300ms, the default is 100msRuijie(config-if-Dot11radio 1/0)#end Ruijie#write |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
