Masquerade - Reyee EG105G

Hi,
How should I configure the Masquerade of an unreachable network in Layer 2 on the EG105 Router?
The networkt that I want to configure the masquerade is 192.168.50.0/24.
My topology;

Dear Thiago Regina,

Could you please explain in more detail what Masquerade of an unreachable network in Layer 2 on the EG105 Router means? Thank you.

Best regards,
Jayden

GTAC-Jayden replied at 2023-8-8 21:25
Dear Thiago Regina,

Could you please explain in more detail what Masquerade of an unreachable netwo ...

Hi,
I need to make sure that the EG105G is masquerade on the 192.168.50.0/24 network.
As you can see in the topology, the 192.168.50.0/24 network has the NBS5200 switch as a gateway and the NBS5200 has a default route forwarding all packets destined for the internet to the eg105G.
In my tests this doesn't work.

Thiago Regina replied at 2023-8-8 21:35
Hi,
I need to make sure that the EG105G is masquerade on the 192.168.50.0/24 network.
As you can s ...

Dear Thiago,

May I please know if the devices are online on Ruijie Cloud?
Could you please help share the cloud project with me to check the configuration? You may please send the project sharing link to postsale@ruijie.com.cn and include the Case ID CS20230808-2217106 in the subject.


Best regards
Jayden

GTAC-Jayden replied at 2023-8-8 22:15
Thiago Regina replied at 2023-8-8 21:35
Hi,
I need to make sure that the EG105G is masquerade on the ...

Yes, they are Online.
As soon as possible I will share with you.

thank you!

GTAC-Jayden replied at 2023-8-8 22:15
Thiago Regina replied at 2023-8-8 21:35
Hi,
I need to make sure that the EG105G is masquerade on the ...

Hi,
I sent for you the project sharing.

To close the topic
My problem was that the NBS5200 had a bug in the routing table that was fixed in version 2.230.
The inssue of masquerade (NAT), I ended up discovering that the EG105 perform NAT from any source to the WAN interface.