|
You can configure ACL with time range on NBR6215-E as follows: 1.cli configuration (1)Configuring Time Range Parameters Ruijie(config)# time-range work # Define a time period named work Ruijie(config-time-range)# periodic daily 9:00 to 12:30 Ruijie(config-time-range)# periodic daily 14:00 to 18:30 (2)Configure the ACL associated with the time range Ruijie(config)# ip access-list extended 100 Ruijie(config-ext-nacl)# 10 deny ip 192.168.1.0 0.0.0.255 any time-range work # During work hours, deny any traffic from Intranet 192.168.1.0/24 to the Internet Ruijie(config-ext-nacl)#20 permit ip any any The ACL contains a deny any statement at the end of the ACL, denying all traffic 2. configure on new cloud (1)Click Devices--->ACL  (2)Click Select the device--->Add--->Add Rule  (3)configure Time Period  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
