|
1. Set enable password Ruijie#configure ter Ruijie(config)#enable password ruijie ------> set password to ruijie Ruijie(config)#end Ruijie#write notice: haven't enable password default 2. Set telnet password Ruijie#configure ter Ruijie(config)#line vty 0 4 ------> enter telnet password configure mode，'0 4' means allow 5 users telnet to switch at th same time Ruijie(config-line)#login Ruijie(config-line)#password ruijie ------> set password to ruijie Ruijie(config-line)#exit Ruijie(config)#end Ruijie#write notice: haven't enable password default 3. Set Eweb password Ruijie#configure ter Ruijie(config)#username admin password ruijie ------>configure eweb login password Ruijie(config)#username admin privilege 15 ------>configure the privilege level of web account is 15，the privilege level of web management need to be 15 Ruijie(config)#ip http authentication local ------>configure web login using local username and password Ruijie(config)#end Ruijie#write notice: default password is admin admin |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
