Cannot enable MU-MIMO on AP RG-840-I
|
I have a problem when i try to enable MU-MIMO on AP RG-840-I but the result show "failed to set radio 1 or 2 MIMO". On the specification of this AP can support MIMO |
|
Hello, May I know which radio you want to enable mi-mimo? And what is device firmware version? Regarding your question, I double check i: radio1 is not supported, radio 2 is supported. What's more, you need to upgrade the latest version to enable it. Best regards, Micca |
GTAC-Micca replied at 2024-9-19 18:08 Thanks for the answare, Both of them cannot be enable, the firmware version is AP_RGOS 11.9(2)B2P2, Release(07130400), can i upgrade firmware of the AP on Access Control ? |
febber replied at 2024-9-20 09:54 Hi sir, Yes, You can refer to this link to upgrade your AP's firmware:https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=3667&extra=page%3D1 Best regards, Steve |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
