|
AP840-L can support 2 types of power supply 1. 54V DC/1.1 A power input over DC connector: The DC connector accepts 2.1 mm/5.5mm center-positive circular plug. A DC power adapter needs to be purchasedindependently. 2. PoE input over LAN 1: The power source equipment (PSE) complies with IEEE802.3af/at/bt standard (PoE/PoE+/PoE++). Note: 1) If both DC power and PoE are available, DC power is preferred. 2) When powered by 802.3bt (PoE++), the AP operates with optimal performance. 3) When powered by 802.3at (PoE+), the AP starts upnormally. LAN 2 and USB port cannot supply power to external devices. 4) When powered by 802.3af (PoE), the AP starts upnormally. Both 2.4 GHz and 5 GHz radio cards can work only in one spatial stream mode. LAN 2 and USB port cannot supply power to external devices. And for AP840-L , maximum power consumption is 40W DC powered: 40 W PoE powered (802.3af): 12.95 W PoE+ powered (802.3at): 22 W PoE++ powered (802.3bt): 40 W Idle mode: 10.3 W For more information, you can also refer to the Installation Guide: Ruijie Networks | Network Devices and Solutions Provider |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 6
