You may know each 2.4 Ghz Channel occupies 22 MHz bandwidth. During you select 40 Mhz or 80 Mhz will double or triple the transmission rate, We call as Channel binding technology.  |
|
Dear Admin, Can you please help or guide us how to change the settings of our frequency from 5G to 2.4G. Many thanks in advance! Yours truly Karlo |
karlo alto replied at 2023-1-23 07:18 Dear Karlo, You may type the following commands to convert the radio type of a Ruijie AP: Ruijie(config)#interface dot11radio 1/0 Ruijie(config-if-dot11radio 1/0)#radio-type 802.11b // 802.11b: 2.4G; 802.11a: 5.8G Please be advised that the above commands can only take effect on the radio that supports radio-type conversion (i.e. supports both 2.4G and 5G), you may find Radio information on the device datasheet. Best regards, Jayden |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
