Strange behaviour S5310-48GT4XS-P-E
|
Hello! Could someone help me to determine what the problem is with a switch? Look at the video. All the ports on the switch are blinking simultaneously. However, there are no issues in the switch's logs as well as LED indicators show that system is fine. Having said that, the switch is working fine. BTW firmware is the latest |
|
The possible cause is that a loop exists on the network. If no loop exists and the network works properly after check, it is possible that data on the network is transmitted at the same frequency. In this case, such blinking phenomenon is normal, especially in the supervision network environment. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
