helo anybody know what is the exactly mib code for ruijie to be able to draw vlan ? information we use: ifOutOctets mib 1.3.6.1.2.1.2.2.1.16 vlan show 0 value.. IF-MIB::ifOutOctets.4096 = Counter32: 0 IF-MIB::ifOutOctets.4165 = Counter32: 0 IF-MIB::ifOutOctets.4166 = Counter32: 0 any idea or am i using wrong MIB code? thanks |
in this case we use cacti for the software monitoring.. if u have device template for ruijie switch RG-S6220-48XS6QXS-H.. it would be good.. thanks |
This function is disabled by default, and you have not configure it, please try config it for vlan interface. |
Edited by hendranata saputra at 2022-10-14 11:48 Micca replied at 2022-10-13 17:56we have enable it right now. interface VLAN 71 route-sample enable ip address xxx.yyy.ddd.254 255.255.255.128 ! CoreSw#sh int v71 Index(dec):4167 (hex):1047 VLAN 71 is UP , line protocol is UP Hardware is VLAN, address is 300d.9e42.8714 (bia 300d.9e42.8714) Interface address is: xxx.yyy.ddd.254/25 ARP type: ARPA, ARP Timeout: 3600 seconds Interface IPv6 address is: No IPv6 address MTU 1500 bytes, BW 1000000 Kbit Encapsulation protocol is Ethernet-II, loopback not set Keepalive interval is 10 sec , set Carrier delay is 2 sec IPv4 statistics: 0 seconds input rate 0 bits/sec, 0 packets/sec 0 seconds output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes 0 packets output, 0 bytes IPv6 statistics: 0 seconds input rate 0 bits/sec, 0 packets/sec 0 seconds output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes 0 packets output, 0 bytes Rxload is 1/255, Txload is 1/255 10 seconds input rate 0 bits/sec, 0 packets/sec 10 seconds output rate 0 bits/sec, 0 packets/sec Input packets 0 Input bytes 0 Input broadcasts 0 Input multicasts 0 Input unicasts 0 Output packets 0 Output bytes 0 the value statistic still 0.. any idea? |
hendranata saputra replied at 2022-10-14 11:46 Sorry, the firmware versions do not support this value statistic at present. |
Micca replied at 2022-10-14 22:24 route-sample enable... it is not working in your official doc ? hemm.. do u have any solution for this ruijie model S6220-48XS6QXS-H |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd