VPN

I successfully created a VPN - L2TP IPSec between office A - B. The B office pcs makes a VPN connection to office A. I now need office A  pcs to connect to office B. Office B does not have a static WAN IP address. Is there android or apple VPN client for mobile cell phones? Can you share a document to create VPN connection for mobile user?

Dear Mario,
Sorry,we don't have a special mobile client.
below is a example for configure L2TP over IPsec VPN on Ruijie EG for clients to side. could you refer to it?

https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=3488&extra=page%3D1


Best regards,


Peng

Hey you! I have created a VPN - L2TP IPSec connection on the corporate intranet. Then I went home and connected to that VPN, the connection was successful, I could ping the computer addresses on the corporate intranet but unfortunately I couldn't access the shared folders. share as well as access the company's internal software. Can you help me explain that problem? model: gateway EG2100 PV2Thank you so much!

Quang Pham replied at 2022-11-8 00:08
Hey you! I have created a VPN - L2TP IPSec connection on the corporate intranet. Then I went home an ...

Dear Mario,


May I know what is the way you shared folders?There are some sharing methods required on the same LAN.
Some require only layers 3 of reachability and related ports Allowed, such as FTP .



Best regards,

Peng

Peng replied at 2022-11-6 20:59
Dear Mario,
Sorry,we don't have a special mobile client.
below is a example for configure L2TP over  ...

Hello, Can you configure a branch office as VPN server? The branch is currently a client to the HQ office.
I need for PCs in the HQ office to be on the same subnet in the Branch office.

Peng replied at 2022-11-8 09:47
Dear Mario,

Hello Peng,
We used a NAS and Google Drive for sharing documents.

-Mario

Mario replied at 2022-11-8 23:45
Hello Peng,
We used a NAS and Google Drive for sharing documents.

Dear Mario,


There is no restriction on accessing NAS and Google through L2TP. However, We need to confirm the port numbers used by your applications and whether there is a firewall that does not allow these ports.
Suggest you check it first.
If you still can't find the cause, we need do capture on EG, For easy investigation,we suggest you can contact us at rita to help you check.



Tech Support Robot:
www.ruijienetworks.com/rita






Best regards,

Peng