 1.Ctrl mode upgrade is designed for disaster recovery 2. If system prompts "send download request"， you have to follow these monitor mode upgrade steps. I. Tips 1. Connect console cable to the switch 2. Connect Ethernet cable to the first copper port or MGMT port（ physical port doesn't linked up until data transfer starts, you also can not check ping connectivity during this process) II. Configuration Steps 1.Assign IP address 192.168.64.1 to laptop, enable TFTP Server and also prepare the firmware, the firmware put on same folder with tftp server. Notice: AP ip:192.168.64.64     Press]  Devices succeed to enter Main mode, execute command "show version", check the firmware version. Ruijie#show version <span style=""">  </span> |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
