How to set RF on Ruijie Cloud?

The RF Setting provides a global setting of wireless country code, bandwidth and intelligent channel/power planning.
Radio Setting
Country code enables you to specify a particular country of operation and it ensures each radio’s broadcast frequency bands, interfaces, channels, and transmit power levels are compliant with country-specific regulations. Frequency bandwidth determine how many non-overlap channels can be used for your AP to reduce RF interference.
The best practice for user experience is 2.4GHz in 20MHz, 5GHz in 40MHz.



Auto Planning
Auto Planning works as a smart RRM function. It can help user to evaluate network channel and power status and provides recommended parameters by its intelligent algorithm.

Custom Channel: Allows user to select specific channel for channel planning
Recent RF Scan History: Records all scanning history and recommended value after scanning
Schedule Settings: Periodic scanning setting for access point
In-Service Scan (Quick Scan):

·        The WiFi service won't be interrupted during scanning process.

·        The scanning result may not include all interference.

Out-of-Service Scan (Deep Scan):

·        The result will cover almost all WiFi interference.

·        The WiFi service will be interrupted during scanning process (disconnect and reconnect) and it will take around 30 minutes

Sync to Device: Whether sync the recommended setting to APs after scanning

Manual Planning
Manual Planning enables user to select designated AP and change the channel and power setting.

   
Only AP740-I can support Radio 3 setting