What's Wi-Fi Optimization?

Wi-Fi Optimization is an intelligent and automatic RF optimization scheme tailored for complicated scenarios with multiple APs. It is supported on Enterprise APs, most Reyee APs, and EGs. After Wi-Fi Optimization collects spatial information, including SSID, channel, signal strength and client status (transfer rate, delay, packet loss rate etc.), it analyses information through the intelligent algorithm to provide the optimal network solution (channel and power planning for each AP), and automatically adjusts the configuration of APs in the network.

1. Which products support Wi-Fi Optimization?

Network Type	Support or Not	Limitation
Enterprise AP	Support	NA
Reyee AP	Part of Reyee APs support	1. Wi-Fi Optimization is not supported if there is only RAP2200(F) or RAP1200(F), but no EG in the network. That is, if a project has only 100M APs but no EG, Wi-Fi Optimization is not supported. 2.  The firmware version should be P53 or higher (Except P60). 3.  There is only one master device in the network.
Reyee EG + Reyee AP	Part of Reyee APs support	The firmware version of EG and AP should be P53 or higher (Except P60).
Home Router	No support

Note:  If there is no Reyee EG in the network, Wi-Fi Optimization can be enabled on less than 50 Reyee APs. That is, 50 1000M Reyee APs can run Wi-Fi Optimization even without Reyee EG. The Enterprise APs do not have this limitation.