a) Log in to the web interface of RAP, select Basic-LAN, then enable Port VLAN add vlan, such as adding vlan10   b) click Port VLAN, configure according to your needs  notcie: UNTAG: If VLAN 10 is set to untag VLAN,VLAN 10 will be the native VLAN of this port. The packets from VLAN 10 will be forwarded over this port without tag VLAN 10 and all untagged packets over this port will be taken as the packets from VLAN 10. TAG: If VLAN 10 is set to tag VLAN, the packets from VLAN 10 will be forwarded over this port with the corresponding VLAN tag. Not Join: If VLAN 10 is set to Not Join , this port will not receive or transmit packets from VLAN 10. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
