|
According to the 11ax Technical Group's plan2, the main improvement goals of the 11ax technology are: 1. System performance: Improve the average throughput performance per user by at least 4 times in the high-density deployment scenario, improve the power consumption of the terminal devices and reduce the communication latency to meet the QoS application requirements in high-density scenarios. 2. Spectrum Efficiency: Improve the efficiency of wireless spectrum resources utilization and provide the ability to manage interference from nearby devices to improve performance in high-density deployments. 3. Bands of Operation: 802.11ax addresses frequency bands between 1 GHz and 6 GHz, which includes the traditional 2 GHz and 5 GHz bands, as well as the new 6 GHz band. There is no requirement for maximum link rate in the 11ax objectives. Alternatively, it focuses on high density, multi-user, and efficiency. This generation of protocol will move in the direction which is more practical and closer to user scenarios. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
