How to configure VLAN and VLAN based DHCP in Ruijie EG3250

Dears, we are using EG3250 as gateway with one WAN link configured as PPPoE on PORT G0/6. We would like to have different VLANS for LAN setup and assign DHCP for each of these VLANS.

Gateway is terminating point for network with coreswitch after gateway and then edge switches. We need to segregate different types using VLANS in the network.

VLAN 1:    Management    -   Mainly for Wi-Fi devices and other devices such as display boards, cloud connected devices.
VLAN10:   Guest   - For parents and others visiting school.
VLAN 20:  STAFF  - Teachers and other staff of school. May include students.
VLAN 30:  VOICE  - Telephone system.
VLAN 40:  CCTV  -  Seperate network for CCTV.

We tried assigning VLANs under single G0/0 port and created DHCP pools but either DHCP works or internet access on required networks works, all is not working properly. please do let me know.

Yatin

Hi  

You already config sub-interface for the vlans in the g0/0 port right?
The problem is some users cannot get ip address and some users cannot access Internet?

May I know what is your network topology?

Or you can contact rita or create a case on caseportal to solve your problem faster'