|
What Do I Do When the Web Page of the S2900 Cannot Be Opened? |
|
Symptom: When a user logs in to the S2928G-12P from the Web page, a prompt, indicating the username and password are incorrect, is displayed. Solution: 3. Check the username and password and ensure that the user level is set to 15. username admin password ruijie username admin privilege 15 4. Configure the HTTP service and authentication mode. enable service web-server http enable service web-server https ip http authentication local 5. If the user still fails to log in, the fault may be caused by browser incompatibility. Upgrade the firmware or enable the compatibility mode of the Internet Explorer. Problem firmware：RGOS 10.4(2b12)p2 Release(180357) Fixed firmware：RGOS 10.4(2b12)p6 Release(196987) |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
