How to configure wireless encryption (WPA/WPA2) on ruijie AP?

1. WPA configuration

WS5708(config)#wlansec 1

WS5708(config-wlansec)#security wpa enable    ---->enable wpa

WS5708(config-wlansec)#security wpa ciphers aes enable ---->enable aes encryption

WS5708(config-wlansec)#security wpa akm psk enable    ---->psk key management

WS5708(config-wlansec)#security wpa akm psk set-key ascii 1234567890  ---->wifi password, no less than 8 digits

2. WPA2 configuration【recommand】

WS5708(config)#wlansec 1

WS5708(config-wlansec)#security rsn enable    ---->enable wpa2

WS5708(config-wlansec)#security rsn ciphers aes enable     ---->enable aes encryption

WS5708(config-wlansec)#security rsn akm psk enable   ---->psk key management

WS5708(config-wlansec)#security rsn akm psk set-key ascii 1234567890   ---->wifi password, no less than 8 digits

Note: One SSID can support both WPA and WPA2, but two passwords MUST match.