Assistance with Load Balancing Two Starlinks Connections with the Same Gateway IP

Hello,
I'm looking for advice on how to set up load balancing with two Starlink connections using a Ruijie router. Both of my Starlink devices have the same gateway IP address (100.64.0.1). Here are the details:

• [strong]Starlink Connection 1:[/strong]
  
  
  • IP Gateway: 100.64.0.1
    
  </li>
• [strong]Starlink Connection 2:[/strong]
  
  
  • IP Gateway: 100.64.0.1
    
  </li>

I'm trying to achieve aggregated bandwidth using these two connections. However, I'm encountering an issue with both Starlink devices having the same gateway IP. I'm concerned this might create a conflict or routing issue.
Could someone please advise on the following:

• Is it possible to configure load balancing with two Starlink connections sharing the same gateway IP? If so, what settings or considerations should I be aware of?
• Are there specific Ruijie router features or configurations that can help manage this scenario effectively?
• Do I need to consider any special configurations, such as using different routing metrics or implementing any specific load balancing algorithms?
  

Any guidance or recommendations would be greatly appreciated!
Thank you!

Dear sir

Unfortunately, for the load balancing configuration on the Reyee EG
currently it will require two ISP links from different address segment and currently we don't relata configuration can support Load balancing with two same ip addresses

Best regards,
Ross