|
Perform the following steps: (1) Try to tracert HQ internal device’s IP on your PC to check which hop the packet lost in. (2) If there isn’t next hop,or the next hop isn’t HQ local IP, try to add static route on your PC. For example: If your PC can’t reach HQ internal devices (192.168.10.0/24) afterVPN connected. Add the following static route on your PC. The 192.168.100.2 isthe PC‘s IP get from HQ.  (3) If you can reach the local IP setting on EG, but can’t reach internal devices IP, try to ping HQ internal devices IP on EG.   (4) If you can’t reach on EG either, check whether firewall on that server is enable. (5) If you have disable the firewall on your server but still can’t reach, please check the internal network settings on HQ, such as VLAN and Route setting. (6) If the problem is still unsolvable, you may start a Live Chat with our Support Engineer for assistance: Ruijie Support |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
