CLI Command to Delete SSID

Hello everyone,

I have a lots of AP which long time ago configured manually. All of those AP are connected to ruijie cloud controller, but we added manually one by one SSID to the AP.

Now, we want to remove ssid number 2 from all access point. Do you have a CLI command to delete SSID? Can we run a batch CLI to all AP using this command?

Thank you

Hi sir,

You can use the batch cli config function on Ruije Cloud.
You can follow the link below to operate:
https://www.ruijienetworks.com/s ... s/slide_75835-75837


Best regards

yujiamin@ruijie replied at 2021-9-20 09:42
Hi sir,

You can use the batch cli config function on Ruije Cloud.

Yes, I knew that we can do batch config, but my question is what is the command to remove the ssid? because i search the manual and did not find any.

Would you please inspire me?

itm@newsaphirho replied at 2021-9-20 11:33
Yes, I knew that we can do batch config, but my question is what is the command to remove the ssid ...

Hi,sir

sorry that didnt give you the command,the command is "no dot11 wlan + [wlan-id]"
any question welcome to contact us!

Best regards

yujiamin@ruijie replied at 2021-9-23 09:46
Hi,sir

sorry that didnt give you the command,the command is "no dot11 wlan + [wlan-id]"

Thank you, that works like magic.

itm@newsaphirho replied at 2021-9-30 16:44
Thank you, that works like magic.

you're welcome,any problem welcome to re-contact us:
https://www.ruijienetworks.com/rita