Ruijie Cloud V3.4.0 version optimization and bug fixing

There are some restriction description and BUG fixing for Ruijie Cloud V3.4.0.More details can be seen in this url link: https://cloud-as.ruijienetworks.com/wiki/c/releaseLatest

Content:

No.	Module	Description	Details
1	Configuration	In bridge   mode, VLAN 233 is not available.	In bridge   mode, the VLAN ID of SSID could not be ‘VLAN233’ if there is an SSID working   in NAT mode on the same AP. Reason: VLAN233 will be used as the internal VLAN   if one or more SSID work in NAT mode.
2	AP	In the   management mode, AP with multiple uplink LAN ports only takes the port LAN 1   as uplink port.	For devices   with dual power supply ports, like AP740-I, AP840-I, only going online   through LAN1 is supported by MACC.
3	History Record	It will take a   while for searching the history.	When the data   of historical users, connection logs and etc. reach to a million count, the   corresponding search operation will take a long time (around 10 seconds).Both   big data and server performance cause the problem.
4	Maintenance	Client log   export failure.	Client data   export will fail if the number of records is more than 100,000.
5	PPSK	PPSK can be   configured in the root network only.	Only the Sub   account user who is assigned with the root network is able to configure PPSK.
6	Captive portal	Captive portal   seamless is globally configured on APs.	If one   portal's SSID enables seamless, all portals' SSIDs will be enabled at the   same time, vice-versa for the disable function.
7	Configuration	The NAT   address pool mode is changed. An address pool is required.	When you   create or edit an SSID and set Forward Mode to NAT, the NAT address pool is   changed. An address pool is required.
8	Sub account	It is   recommended to select a layer-1 network to create a sub account.	Only the sub   account of layer-1 network can view statistics in Analysis.
9	Facebook Like	An error   occurs if the iPhone user taps Like during authentication.	If the user   authenticates to SSID through the popup page which contains Facebook Like   function, when he taps the Like button, an error will occur. In order to   normally use Facebook Like function, it is recommended to access the Internet   through a browser after connecting to SSID, and then open the portal page.
10	Change the   time zone of network	After the time   zone is changed, the data of existing reports are not consistent with the new   time zone.	After the time   zone is changed, the data of existing reports will not be recounted, so the   statistics are not consistent with the new time zone. The data of   newly-generated reports are correct.
11	Voucher	Voucher   limitation of each network.	Up to 20,000   vouchers can be added to each network (including sub network), and up to   1,000 vouchers can be exported.
12	Tunnel	Tunnel   limitation on EG	In the same   tenant, up to 10 tunnels can be created. On the same   device, up to 5 tunnels can be created. The expiry   time for the tunnel is 3 hours.
13	Client	Limitation on   historical clients displaying.	Up to 1000   historical clients are displayed.
14	AC Management	VAC limitation	Not support the VAC   scenario
15	AC Management	AC RRM   limitation	Only when the country   code is CN(China) or US(United States), RRM is supported.
16	AC Management	AC   configuration limitation	Only APs in the default   group of AC can be configured on Cloud.
17	Reyee AP	Not support   PPSK, Portal auth and RRM	PPSK, Portal Auth and   Cloud RRM are not supported on Reyee APs.
18	Portal SMS	SMS login	Not support phone number   reporting and online policy control.
19	Hand over Project	Hand over a project   to another account	The project to be handed over should have less than 100 sub projects.
20	Reyee AP	Network Group Level	Recomend not to add subgroup for Reyee APs, if required, only one level of subgroup can be used.