|
Login the reyee switch which support link aggregation, NBS3100, NBS3200, NBS5100 and NBS5200 can support. Step 1: Choose Switches → Manage to configure the switch  Step 2：Choose Ports → Aggregate Ports to configure the link aggregation  Step 3: Fill in the aggregate port number and select the port member.  |
| hi, what is the meaning under the global setting > load balance? which one should i choose? |
ahfatt_606@hotm replied at 2021-8-18 19:23 recommend src-dst-ip |
ahfatt_606@hotm replied at 2021-8-18 19:23 dst-mac: Distribute traffic based on the destination MAC address of the incoming message. src-mac: Perform traffic distribution based on the source MAC address of the input message. src-dst-ip: Distribute traffic based on source IP and destination IP. dst-ip: Distribute traffic based on the destination IP address of the input message. src-ip: Distribute traffic based on the source IP address of the input message. src-dst-mac: Distribute traffic based on source MAC and destination MAC. |
| Thanks Daisy, by the way, does NBS series support IEEE 802.3ad LACP and IEEE 802.3ad draft v1? |
ahfatt_606@hotm replied at 2021-8-21 05:50 Can support static port aggregation. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
