| What will happen when Radio1 set as 5G but the Radio1 on dievce not support 5G |
|
As far, there is 3 items in radio configuration,Band/Bandwidth/Max Clients, if set radio1 as 5G/40Mhz/100, but the device only support 2.4G on radio1, then, the final settings on device will be 2.4G/40Mhz/100; and if the radio1 set as 2.4G/80Mhz/100, but the device only support 20Mhz and 40Mhz on radio1, then, the final settings on device will be 2.4G/-/100, the Bandwidth will continue the previous settings. For such problems, because the Group Config is a public config template, some settings may not be supported on every device, then, the final configuration on the device depends on the device's support. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
