|
Overview Reyee EW Router has four modes to choose from atthe beginning (router mode, relay mode, Mesh wifi, WISP), and two modes(EWEB/APP).  EW Router,opening, configuration, SSID , Internet Relay/Mesh Wi-Fi mode failure phenomenon Issue Description Unable to connect to the main router in relay mode  Issue Analysis Is the mode of the relay router correct? Login to this relay router, can you scan the mainrouter's ssid In the case of pressing the Mesh button fornetworking, has the main router pressed the Mesh button? Check the distance between the two routers if theyare connected wirelessly in relay mode In wired scenarios , whether the two ports areconnected correctly Solution Confirm that the relay router is in relay mode  ② Make this relay router within 2 meters of themain router ③ The relay router joins the main router in theform of scanning wifi; or after the relay router is successfully powered on, itautomatically connects to nearby relay routers by pressing the Mesh button onthe main router  ④ In wired scenarios , the main router is connectedto the LAN port, and the relay router is connected to the WAN port  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 6
