How to manage the device remotely?

Topology
The Reyee router is often used with a Reyee PoE switch and a Reyee RAP.

1. Connect the devices through Ruijie Cloud App for configuration and remote maintenance.
2. Open Ruijie Cloud App, click Create a Project, and select Connect to Wi-Fi.

3. After you click Yes, Please connect SSID @Ruijie-mxxxx.

Note: @Ruijie-mxxxx is generated after network self-organization established successfully, while @Ruijie-sxxxx is generated on a standalone device. xxxx ]is the last four digits of the MAC address of a device.

4. After you access SSID @Ruijie-mxxxx, Ruijie Cloud App will generate the topology and detect all  devices on the SON.

5. After all devices are detected, Cloud App will display them and show the topology.

6. Click Start Config to perform the basic configuration of this project. Set Project Name and Management Password.

7. Select the scenario of this project based on your requirement.

8. Configure the Internet. For WAN configuration, you can choose PPPoE, DHCP, or Static IP.

9. Configure the SSID.

• Enter the name of the SSID.
• Configure it as open to allow clients to access this SSID.
• Configure the password for this SSID.
• Select the region code.
• The configuration will be synchronized to the network.
  

10. After about 3s, Ruijie Cloud App will prompt that the configuration is delivery succeed

11. Connect to the SSID created just now to manage the whole network on Cloud App.