Ruijie Community

Title: How do I telnet a fit AP on an AC? [Print this page]

Author: GTAC-Daisy Time: 2019-7-1 14:51
Title: How do I telnet a fit AP on an AC?

1. Run the show ap-config su command to query the AP's IP address.

2. Telnet the AP's IP address.(By default, the Telnet password is ruijie,and the enable password is apdebug.)

Note: Fit APs are managed andcentrally configured by the wireless AC. You are not advised to independentlylog in to an AP for configuration.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)