Ruijie Community

Title: How do I check the channel usage of an AP? [Print this page]

Author: GTAC-Daisy Time: 2019-7-2 09:03
Title: How do I check the channel usage of an AP?

On the AC, run the followingcommand (The AC needs to interwork with the WIS):

Ruijie#show wis radio-link-quality

channelUsingindicates the bandwidth usage.
On the AP, run the following commands:

Ruijie#run-system-shell

~ # athstats | grep count

1325568267 Channel clear count

3131856075 Cycle count

1325568267/3131856075 =42.3%//The air interface usage is 42.3%.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)