Ruijie Community

Title: How do I add a secondary IP address for an EG series device on the Web UI and in the CLI? [Print this page]

Author: linxihao@ruijie Time: 2019-7-2 16:13
Title: How do I add a secondary IP address for an EG series device on the Web UI and in the CLI?

1. Onthe Web UI, choose Network > Interface. On the Basic Settings page, select a LAN port and add a secondary IPaddress for it. In the CLI, run the following command:

interface GigabitEthernet 0/1

ip address 192.168.150.1255.255.248.0

ip address 192.168.121.1 255.255.255.0 secondary

ip address192.168.122.1 255.255.255.0 secondary
Multiple secondary IP addresses can be added.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)