Ruijie Community

Title: How to configure rate-limit [Print this page]

Author: GTAC-Daisy    Time: 2019-8-20 11:26
Title: How to configure rate-limit

How to configure rate-limit?

On macc mode:

Choose: configuration->basic->ssid


On Fat mode:

Ruijie#configure terminal

Ruijie(config)#wlan-qos ap-based per-user-limit up-streams average-data-rate 100 burst-data-rate 1024

----->base on AP,per-user uplink rate-limit is 100KB/s


Ruijie(config)#wlan-qos ap-based per-user-limit down-streams average-data-rate 200 burst-data-rate 1024

----->base on AP,per-user download rate-limit is 200KB/s


Ruijie(config)#wlan-qos wlan-based 1 per-user-limit up-streams average-data-rate 256 burst-data-rate 1024

----->base on ssid, per-ssid uplink rate-limit is 256KB/s


Ruijie(config)#wlan-qos wlan-based 1 per-user-limit down-streams average-data-rate 256 burst-data-rate 1024
----->base on ssid, per-ssid download rate-limit is 256KB/s

Ruijie(config)#end

Ruijie#write








Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2