Ruijie Community

Title: [Wireless]Wall-Mount Access Point Series Parameter Table [Print this page]
Author: GTAC-Jenny    Time: 2021-10-13 14:19
Title: [Wireless]Wall-Mount Access Point Series Parameter Table
Model
AP130(L)
AP130(W)
AP130(W2)
AP130-W V1.0
AP130-W V1.1
Recommended Number of Clients
32
32
32
32
32
Maximum Number of Clients
32
32
32
240
32
WLAN ID Number
8
8
8
8
8
WDS
Not Support
Not Support
Not Support
Not Support
Not Support
PPPoE Dial Function
Support
Support
Support
Support
Support
NAT
Support
Support
Support
Support
Support
Web Management Function
Support
Support
Support
Support
Support
Authorized Occupancy
0.5
0.5
0.5
0.5
0.5
GPS
Support
Support
Support
Support
Support
Power Supply
Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
AP Coverage Area(Radius)
Approximately 1~2 rooms, one room per AP (6~10m) is recommended
Approximately 1~2 rooms, one room per AP (6~10m) is recommended
Approximately 1~2 rooms, one room per AP (6~10m) is recommended
Approximately 1~2 rooms, one room per AP (6~10m) is recommended
Approximately 1~2 rooms, one room per AP (6~10m) is recommended
Model
AP130-S
AP120(H)
AP120-S
AP120-W
AP110-W
Recommended Number of Clients
32
16
16
16
8
Maximum Number of Clients
32
32
32
32
26
WLAN ID Number
8
8
8
8
8
WDS
Not Support
Not Support
Not Support
Support
Not Support
PPPoE Dial Function
Support
Not Support
Not Support
Support
Not Support
NAT
Support
Support on MACC
Not Support
Support
Not Support
Web Management Function
Support
Support【Fat】
Support
Support
Not Support
Authorized Occupancy
0.5
0.5
0.5
0.5
0.5
GPS
Support
Not Support
Not Support
Support
Not Support
Power Supply
Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
Support PoE Power over Ethernet (support 802.3af/802.3at compatible power supply)
AP Coverage Area(Radius)
Approximately 1~2 rooms, one room per AP (6~10m) is recommended
Approximately 1~2 rooms, one room per AP (6~10m) is recommended
Approximately 1~2 rooms, one room per AP (6~10m) is recommended
Approximately 1~2 rooms, one room per AP (6~10m) is recommended
Recommend a room (6~8m)
Model
RG-AP180(Unavailable in Japan)
Recommended Number of Clients
32
Maximum Number of Clients
1024
WLAN ID Number
8
WDS
Not Support
PPPoE Dial Function
Support
NAT
Support
Web Management Function
Support
Authorized Occupancy
0.5
Power Supply
Support PoE
Support local power supply (DC Power adapters should be purchased from third-party vendors separately if needed)
AP Coverage Area(Radius)
 about 1 - 2 rooms, recommend one room (6 - 10m)
Author: dananto@wptekno    Time: 2022-1-28 21:13
hi, can you add RG-AP180 model too
Author: dananto@wptekno    Time: 2022-1-28 21:13
hi, can you add RG-AP180 model too
Author: GTAC-Jenny    Time: 2022-2-18 11:39
dananto@wptekno replied at 2022-1-28 21:13
hi, can you add RG-AP180 model too

dear sir, already added it, pls check.
Author: yujiamin@ruijie    Time: 2022-6-4 22:23
Others Ruijie AP series devices parameters
[Wireless]Ruijie AP Series Parameters Table





Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2