Ruijie Community

Title: How to configure speed limit on EW series? [Print this page]

Author: GTAC-Wayne    Time: 2022-2-16 17:20
Title: How to configure speed limit on EW series?
Please perform the following steps:
a)   Login to the eweb of EW device.
Click ‘Flowcontrol’ in the advanced menu. Here are two ways to set speed limit for users. The first one was ‘Smart Flow Control’, which means adjust the bandwidth allocated to each user according to the user count. The second ‘Custom Policy’ means can customize the speed for special users range.



b)   Click ‘Add’ to add a new policy for speedlimitation
Input the policy name and IP range to be limited. Then chose the bandwidth type, if Shared, it means all users in this IP range will share the bandwidth, if Independent, it means each user in that range have independent bandwidth.


Then input the uplink and downlink rate, CIR means the Committed information Rate and PIR means the Peak Information Rate. In the end, click ‘OK’ button to save the policy.













Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2