Title: RG-AP180 Etherport 2-5 are not working [Print this page] Author: meno.abels@advi Time: 2022-6-17 18:01 Title: RG-AP180 Etherport 2-5 are not working Hi,
I have two RG-AP180 these devices have 1 Backsite and 4 visible port. After I updated to the latest version the 4 visible port are not working as expected.
They seams not to be bridged to the backsite port --- i had a look to the cli and everything looks fine:
!
interface GigabitEthernet 0/1
encapsulation dot1Q 1
!
interface GigabitEthernet 0/2
encapsulation dot1Q 1
rldp port loop-detect shutdown-port
!
interface GigabitEthernet 0/3
encapsulation dot1Q 1
rldp port loop-detect shutdown-port
!
interface GigabitEthernet 0/4
encapsulation dot1Q 1
rldp port loop-detect shutdown-port
!
interface GigabitEthernet 0/5
encapsulation dot1Q 1
rldp port loop-detect shutdown-port
!
Is there something known how to enable the visible ports again?
thx
meno Author: GTAC-Patrick Time: 2022-8-12 11:59
Dear sir,
May I know what interface your PC is connecting?
Or would you provide the whole configuration of this AP for us ?
Best regards,
Patrick
Welcome to Ruijie Community (https://community.ruijienetworks.com/)