Ruijie Community

Title: How to configure policy-based route on EG? [Print this page]

Author: Daisy Time: 2022-7-2 15:16
Title: How to configure policy-based route on EG?
I want VLAN 1 go through WAN 1, VLAN 2 go through WAN 2， how can I do it?

You can use the policy route to do it, for example
   vlan 1 is 192.168.1.0 vlan 2 is 192.168.2.0.
   WAN 1 is 10.100.10.1,  gateway is 10.100.10.254
   WAN 2 is 10.100.11.1，gateway is 10.100.11.254

Step 1 click route policy-base route， click add ACL

Step 2, Add two ACL 10 and 11，set ACE to permit 192.168.1.0 and 192.168.2.0

Step 3 Configure Policy route

Finished

Welcome to Ruijie Community (https://community.ruijienetworks.com/)