Ruijie Community

Title: can the reset button be disabled [Print this page]

Author: support@speedsu    Time: 2022-7-8 04:00
Title: can the reset button be disabled
We are a WISP in South Africa, I am testing out some of your indoor Ap's.
Remote Management of client Access Points or routers is our main concern
Currently we use the Ubiquity AirCube ISP, and are looking to change to another indoor Ap, that can be managed remotely.
We found that clients were resetting there units all the time.
By disabling this function threw the cloud, saved us on call outs.

Can the reset button on the back of the indoor Ap's / Access points be disabled.



Author: zhangwei13    Time: 2022-7-8 10:59
Hi sir, the physical reset button of device cant be disabled, because it's a very convenient way for customer to restore the device to default settings, sorry for that.

Or is your question that how to prevent user reboot device on Cloud?

welcome to re-contact us

Best regards


Author: Justinmachany93    Time: 2022-7-11 17:58
GTAC-Wayne replied at 2022-7-8 10:59
Hi sir, the physical reset button of device cant be disabled, because it's a very convenient way for ...

I have the same question. Or is your question that how to prevent user reboot device on Cloud?

octordle



Author: zhangwei13    Time: 2022-7-18 10:27
carlhammond hammond replied at 2022-7-11 17:58
I have the same question. Or is your question that how to prevent user reboot device on Cloud?

o ...

When you share the project on Cloud, please select the 'Read-only' permission, so that users cant not reboot device.





Author: The Wi-Fi Hero    Time: 2022-7-29 04:22
the reset button is there for a reason. The last thing you want is, you really want to reset the AP but it doesn't work, then it become a brick!
What you can do is to seal up the reset pole and pick a area that CCTV can view the AP. So with the log, you will know who is the one doing it. Then contact the person not to do it anymore.

Author: zhangwei13    Time: 2022-7-29 16:15
The Wi-Fi Hero replied at 2022-7-29 04:22
the reset button is there for a reason. The last thing you want is, you really want to reset the AP  ...

So we suggest to prevent unrelated people from resetting the device, like install the AP on some higher place.


Author: support@speedsu    Time: 2022-11-24 00:05
GTAC-Wayne replied at 2022-7-8 10:59
Hi sir, the physical reset button of device cant be disabled, because it's a very convenient way for ...

If I was looking at it from an end users perspective i suppose the reset button is good.
But from an ISP point of view, we manage our clients routers remotely, having this reset button working to reset the unit, is just going to cost us time and money, sending our staff to go to the end users house and reconfigure the unit.

Author: support@speedsu    Time: 2022-11-24 00:05
GTAC-Wayne replied at 2022-7-8 10:59
Hi sir, the physical reset button of device cant be disabled, because it's a very convenient way for ...

If I was looking at it from an end users perspective i suppose the reset button is good.
But from an ISP point of view, we manage our clients routers remotely, having this reset button working to reset the unit, is just going to cost us time and money, sending our staff to go to the end users house and reconfigure the unit.

Author: support@speedsu    Time: 2022-11-24 00:06
carlhammond hammond replied at 2022-7-11 17:58
I have the same question. Or is your question that how to prevent user reboot device on Cloud?

o ...

Rebooting / restarting the unit is not a problem, they just unplug the power, but when they keep the reset button in, the unit is reset and we are requested to go to site and reconfigure it.

Author: support@speedsu    Time: 2022-11-24 00:08
GTAC-Wayne replied at 2022-7-18 10:27
When you share the project on Cloud, please select the 'Read-only' permission, so that users cant  ...

We have about 1 200 routers at end users homes and offices. All of them are managed by the ISP, we do not give end users access to the routers config at all. We just found that they reset them and or configure them incorrectly and end up blaming the ISP.

Author: support@speedsu    Time: 2022-11-24 00:21
GTAC-Wayne replied at 2022-7-29 16:15
So we suggest to prevent unrelated people from resetting the device, like install the AP on some h ...

This is not practical from an Internet Service providers point of view.,

Author: lionel@bitconne    Time: 2023-10-13 20:11
This is quite an issue for us as well. Also located in South Africa. We use the RG-EW1200 series Home Routers for our clients. We have to spend money on stickers etc to tell people not to reset their routers, then 5 minutes after they receive their routers we get a call and the router has been factory reset. Since we have a national footprint, it's impossible to do callouts to those clients so we end up spending more than an hour in some cases talkin the client through the setup. It will really save us a lot of effort if we were able to disable the reset button.

Author: yujiamin@ruijie    Time: 2023-10-13 20:40
Lionel Redelinghuys replied at 2023-10-13 20:11
This is quite an issue for us as well. Also located in South Africa. We use the RG-EW1200 series Hom ...

Dear sir

We have received your request. This request will be evaluated by our r&d team. If there are any updates about this request, I will feedback it to you. Thank you for your suggestion.

Best regards
Jenny


Author: admin@afrieta.c    Time: 2024-1-25 22:16
There are many ISPs that require this functionality. Remember that we are your customers here, not the end user. Your units default to DHCP. Once reset and in instances where PPPOE is needed to connect to the ISP network, a reset by the user renders the router inaccessible to the ISP which means costs to fix this that are often higher than the cost of the router.
So an option to disable the reset button would be great. If not then you have to try and see how you can allow us to flash a default PPPOE account that will not be erased if the reset button is pressed.
Thanks for a good product.

Author: nbctcp@gmail.co    Time: 2024-2-12 12:17
GTAC-Jenny replied at 2023-10-13 20:40
Dear sir

We have received your request. This request will be evaluated by our r&d team. If there  ...

other brand has feature to disable reset button using cli.
I hope Ruijie has that feature too
(host) [mynode] (config) #ap system-profile sample
(host) [mynode] (AP system profile "sample") #disable-factory-reset





Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2