Ruijie Community

Title: How to change the SSID Radio from Radio2(5GHz) to Radio1(2.4GHz) [Print this page]

Author: itadmin@lhg.com Time: 2022-9-30 16:12
Title: How to change the SSID Radio from Radio2(5GHz) to Radio1(2.4GHz)
Edited by unknown unknown at 2022-9-30 19:54

Cna I change the SSID Radio from Radio2(5GHz) to Radio1(2.4GHz) by command (like Web CLI)? If yes, please advise the command statement.

Thanks.

Author: zhangwei13 Time: 2022-9-30 20:31
Dear sir, may i know your AP model? coz only few ruijie AP that support change radios.
You can use the below commands to change it if your AP hardware support it.
config t
TestRuijie(config)#int dot11 2/0
TestRuijie(config-if-Dot11radio 2/0)#radio-type 802.11b
Failed to set radio type for unsupported hardware. ---- if not support, will show this msg.

Author: itadmin@lhg.com Time: 2022-10-3 08:34

GTAC-Wayne replied at 2022-9-30 20:31
Dear sir, may i know your AP model? coz only few ruijie AP that support change radios.
You can use t ...

Thank you for your reply.
the model "AP820-L(V2)"

Author: zhangwei13 Time: 2022-10-8 09:42

unknown unknown replied at 2022-10-3 08:34
Thank you for your reply.
the model "AP820-L(V2)"

Hi sir, as checked, this model only support two radios, not support radio 3

Welcome to Ruijie Community (https://community.ruijienetworks.com/)