Ruijie Community

Title: Configuring Aggregated Port [Print this page]

Author: M.S.Bezzubov@mg Time: 2022-11-9 23:41
Title: Configuring Aggregated Port
Hi there

First thing a few words about what i have
AP840-I AP_RGOS 11.9(6)B1, Release(07201411)
AC_RGOS 11.9(6)W1B1, Release(09192520)

So i am planning to use a aggegate port to test 802.11ax on more than 1 Gb/s link. According to docs I 've done config on AC:

ap-group TEST-GroupAP-T
interface-mapping 1 426 radio 802.11a ap-wlan-id 1
interface-mapping 2 426 radio 802.11a ap-wlan-id 2
interface-mapping 3 426 radio 802.11a ap-wlan-id 3
ap-interface wireport 1 port-group 1
ap-interface wireport 2 port-group 1
!
ap-config all

ap-interface wireport 1 port-group 1
ap-interface wireport 2 port-group 1

On the access side we have a cisco switch. This is a cisco part:

interface Port-channel70
description TST_WIFI6_AP
switchport access vlan 770
switchport mode access
switchport nonegotiate
storm-control broadcast level 20.00
storm-control multicast level 20.00
storm-control action shutdown
storm-control action trap
spanning-tree portfast
spanning-tree bpduguard enable
ip dhcp snooping limit rate 10

interface GigabitEthernet1/0/26
switchport access vlan 770
switchport mode access
switchport nonegotiate
storm-control broadcast level 20.00
storm-control multicast level 20.00
storm-control action shutdown
storm-control action trap
channel-group 70 mode on
As far I know lacp not supported, static etherchannel only.

Unfortunately, it doe not work no matter I play.

Ruijie#sh aggregatePort summary
AggregatePort MaxPorts SwitchPort Mode Ports
------------- -------- ---------- ------ -----------------------------------
Is it any change to bind Ruijie and Cisco come together?

Author: GTAC-Patrick Time: 2022-11-10 13:56
Hi, sir
It is not suggested to configure aggregated port between AP and switch from other vendor

Author: M.S.Bezzubov@mg Time: 2022-11-10 20:33

Patrick replied at 2022-11-10 13:56
Hi, sir
It is not suggested to configure aggregated port between AP and switch from other vendor

I am understand that. But is there a way?

Author: GTAC-Patrick Time: 2022-11-11 11:41

Max Bezzubov replied at 2022-11-10 20:33
I am understand that. But is there a way?

Sorry about that, no other way can do that, because differences in algorithms may result in failure to create aggregated port.

Author: M.S.Bezzubov@mg Time: 2022-11-11 18:48

Patrick replied at 2022-11-11 11:41
Sorry about that, no other way can do that, because differences in algorithms may result in failur ...

Thats wierd. According to docs this is a standard LAG (static aggregation). Or there is not an accuracy documentation?

Author: GTAC-Patrick Time: 2022-11-14 09:36

Max Bezzubov replied at 2022-11-11 18:48
Thats wierd. According to docs this is a standard LAG (static aggregation). Or there is not an acc ...

Sorry, not an accuracy document for you.

Author: truekrishnarjun Time: 2022-11-14 18:20

live baccarat replied at 2022-11-14 17:47
우리는 최고의 라이브 바카라 당신이 경험한 적이 있습니다. 많은 돈을 벌 수 있는 게임이 있습니다.
그리 ...

If MS Outlook is used frequently, you may get the error code [pii_email_99514d5fed5d3eee8cdd]. This means that the business processes are stopped in the meantime, and the application of MS Outlook should remain installed with the latest version is common.

Welcome to Ruijie Community (https://community.ruijienetworks.com/)