Ruijie Community

Title: How to add AC to WIS Cloud? [Print this page]

Author: GTAC-Sophia Time: 2023-1-18 14:11
Title: How to add AC to WIS Cloud?
Step 1 Configure the CWMP interconnection address for the AC.
When adding an AC, you need to configure the CWMP interconnection address. Run the following CLI command to configure CWMP and DNS:

conf
ip name-server
8.8.8.8
cwmp
acs url https://wiscloud.ruijienetworks.com/acs
end
wr

Step 2 Add the AC on the WIS
Click My Network > Device Management> Add Device. Enter the serial number of the A and select the device type and select the site to add the device. You can find that the device is online on the WIS three minutes later. Then you can use the intelligent analysis function

Welcome to Ruijie Community (https://community.ruijienetworks.com/)