Ruijie Community

Title: How to change the country code on wireless bridge? [Print this page]

Author: GTAC-Sophia    Time: 2023-7-4 16:11
Title: How to change the country code on wireless bridge?
Choose Wireless>Country/Region> Country/Region. Choose the target country/region from the drop-down list and click Save.



Note: the country/region code is changed, the Wi-Fi network will restart, and the NVR and the camera will be connected after the Wi-Fi network is restarted. If you change the country/region code in the case of device disconnection, the WDS connection may fail. The current channel may be switched to Auto because it is not supported by the country/region. Therefore, exercise caution when performing this operation.






Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2