Title: How to power off the S7808C switch instead of unpluging the power cable? [Print this page] Author: GTAC-Sophia Time: 2023-7-4 16:18 Title: How to power off the S7808C switch instead of unpluging the power cable? You can use this command to power on or off the specified board. power{on | off} [switch devid] slot slotid on: Powers on the specified board. off:Powers off thespecified board. switchdevid: It is supported inVSU mode only. It specifies the chassis No. of the specified board to be powered on/off. By default, it refers to the current chassis. slotslotid: Specifies the slot No. of the board to be powered on/off. The supervisor modules are inserted in M1 and M2 slots. The FE cards are inserted in FE1, FE2,FE3, and FE4 slots.
Welcome to Ruijie Community (https://community.ruijienetworks.com/)