Title: How to set a long distance on the Reyee ES series? [Print this page] Author: GTAC-Sophia Time: 2023-7-14 10:38 Title: How to set a long distance on the Reyee ES series? In the Cloud.Click the SN of the device
Select Ports and change the status to Enabled, Speed to 1000M (maximum Speed), Duplex to full Duplex
3.In the web interface you can Click[Switch Setting]-->[Port Setting]
Select Ports and change the status to Enabled, Speed to 1000M(maximum Speed), Duplex to full Duplex.
Note: Data transmission distance is limited by the transmission medium. When your transmission speed is higher, the signal frequency is relatively high. In different media produced at different intensity of interference, it may become a barrier to data transmission, thereby affecting the bit error rate of data! In other words, the lower the speed, the longer the transmission distance
Welcome to Ruijie Community (https://community.ruijienetworks.com/)
