Title: How to create bridge on NBR6205-E [Print this page] Author: Thiago Regina Time: 2023-9-29 03:55 Title: How to create bridge on NBR6205-E Hello,
I need to perform the configuration below on the NBR6205-E
Create a new bridge with ip 192.168.4.254/24 and included interface LAN1, LAN2 and LAN3.
In my LAN0 will be my management interface with ip 172.16.2.1/24.
The configuration in case 2 worked, but i'm in doubt in case 1.
I need help for configuration in eWeb interface and Cloud.
Can you help me ?
Thanks you for now. Author: javier@ruijie.c Time: 2023-9-29 09:09
Hello dear:
You can check the config gide on section 7. Network configuration to check if the settings deployed were correct.
