Ruijie Community

Title: Two APS both giving different IP series to Client [Print this page]

Author: levijustus@live    Time: 2024-2-11 11:51
Title: Two APS both giving different IP series to Client
Hi
I have two AP (RAP2260 G) and (RAP2200 E) connected to the Switch ES205GC-P.

The switch is connected to another ISP Provided router and is this ISP router is a DHCP server.(192.168.1.1 - 192.168.1.254)
When I get connected to RAP2260G I get the IP address series same as the ISP router (192.168.1.x) but when i get connected to AP RAP2200E, the IP address I get is different 192.168.120.x.
I would like both the APs to serve from the DHCP server. Kindly need guidance. This is a default configuration and no changes made.







Thanks in Advance
Vicky

Author: GTAC-Jayden    Time: 2024-2-11 11:55
Dear Vicky Boy,

Could you please log in the eWeb of RAP2200E and check what is its management IP address? Please also check if its current work mode is AP mode, if not, please change it to AP mode.

Best regards,
Jayden

Author: levijustus@live    Time: 2024-2-11 12:02
GTAC-Jayden replied at 2024-2-11 11:55
Dear Vicky Boy,

Could you please log in the eWeb of RAP2200E and check what is its management IP ad ...

Thanks for your reply Jayden,
Yes its already showing as AP.
This is also showing as slave




Author: GTAC-Jayden    Time: 2024-2-11 12:09
Vicky Boy replied at 2024-2-11 12:02
Thanks for your reply Jayden,
Yes its already showing as AP.
This is also showing as slave

Dear Vicky Boy,

The current firmware on the AP is an old version. Could you please upgrade its firmware? You may download the firmware file from the link below and perform a local upgrade:
https://www.ruijienetworks.com/resources/software/rg-rap2200e-firmware/rap2200e-reyeeos-2-262/


Best regards,
Jayden

Author: levijustus@live    Time: 2024-2-11 12:25
GTAC-Jayden replied at 2024-2-11 12:09
Dear Vicky Boy,

The current firmware on the AP is an old version. Could you please upgrade its fi ...

Dear Jayden,
I have upgraded the firmware. Since I am connected remotely to the site, I dont have anyone to connect to the wifi to check if I am getting the same Ip adress series . I will check later today and update you. Thank you so much. Meanwhile if there is anyother settings I need to check please suggest.

Author: levijustus@live    Time: 2024-2-11 14:38
Vicky Boy replied at 2024-2-11 12:25
Dear Jayden,
I have upgraded the firmware. Since I am connected remotely to the site, I dont have  ...

Upgraded the firmware. rebooted the devices and everything working as expected.
Thanks a million Jayden.





Welcome to Ruijie Community (https://community.ruijienetworks.com/) Powered by Discuz! X3.2